Jensen Swing SP200D Duck Styled Spring Rider Animal

Duck Spring Rider – Blue with Yellow Bill

Brighten up your playground with the Duck Spring Rider, built for fun, safety, and long-lasting performance. Crafted from rotomolded polyethylene, this rider resists fading, cracking, and weather damage while delivering a smooth and secure ride for young children.

• Color: Blue body with yellow bill

• Material: Rotomolded polyethylene with heat-applied, fade-resistant decals

• Spring Boot: Enclosed in a rubber boot to prevent pinching

• Mounting Plate: 9¼″ square with 4 holes (1″ from edge, 7¼″ center-to-center)

• Height:

  • Bottom of duck: 13¼″ from the ground

  • Seat height: 25½″ from the ground

• Hardware: All necessary installation hardware included

Installation Guidelines

• Seat Height Range:

  • Toddlers: 12″–16″

  • Preschoolers: 14″–28″

• Use Zone: Minimum of 6 feet from the at-rest perimeter

• Steps:

  1. Identify and dig footings per local requirements

  2. Attach spring to bottom plate using SPR casting

  3. Use assembled spring’s 9¼″ x 9¼″ plate as a template and insert ½″ anchor bolts into wet concrete

  4. Allow concrete to cure 2–3 days

  5. Reposition and bolt down the spring assembly

  6. Mount the duck body and tighten all bolts

  7. Install resilient surfacing beneath and around the rider

Maintenance Schedule

• Inspect monthly and at the start/end of each season for:

  • Cracks, rust, or vandalism

  • Loose, missing, or worn hardware

  • Tears in spring boot or exposed footings

• Lubricate moving metal parts as needed

• Keep records of all inspections and maintenance for public-use compliance

Caution: All playground surfaces should be checked for excessive heat before play. Adult supervision is required at all times.

This cheerful and sturdy Duck Spring Rider is a safe and engaging play option perfect for daycares, parks, schools, and residential settings alike.