Bee Spring Rider – Heavy-Duty Playground Equipment
Built for durability and safety, the Bee Spring Rider is a vibrant and engaging addition to any playground. Designed for children up to 125 lbs, this rider combines a fun aesthetic with sturdy construction and compliance with key safety standards.
Key Features
-
Durable Construction: Made from rotomolded polyethylene for long-lasting performance and resistance to weather and fading.
-
Fade & Vandal-Resistant Colors: Bright yellow with a red smile, heat-applied for maximum longevity and protection.
-
Safe Ride Experience: Includes a fully enclosed spring in a rubber boot to prevent pinching and ensure smooth motion.
-
Weight Limit: 125 lbs
Dimensions
-
Mounting Plate: 9¼” square with four holes located 1″ from each edge
-
Hole Spacing: 7¼” center-to-center
-
Ground to Bottom of Rider: 13¼”
-
Ground to Top of Seat: 22¼”
Installation Requirements
Installation Steps:
-
Determine proper footing locations and dig holes (size may vary by soil and weather).
-
Attach spring to bottom plate using SPR casting.
-
Pour concrete into footings and level off.
-
Use the 9¼” x 9¼” plate as a template to insert ½″ anchor bolts into concrete.
-
Remove spring assembly and allow concrete to cure for 2–3 days.
-
Reinstall spring assembly and secure bottom plate to anchor bolts using ½″ lock nuts and flat washers.
-
Tighten all fasteners and install impact-absorbing surfacing.
Maintenance Guidelines
Checklist:
-
Inspect for cracks, rust, loose or missing hardware, and vandalism
-
Ensure rubber boot is intact with no tears
-
Lubricate metallic moving parts
-
Replace damaged components promptly
-
Confirm no exposed footings, anchor points, or obstacles around the unit
-
Maintain documented inspection and maintenance logs
Note: Any damage resulting from vandalism, abuse, or misuse will void all warranties.
Safety Notice
This equipment is designed in reference to safety guidelines outlined in CPSC Handbooks and ASTM standards (F2373-11, F1487-11, F1148-09). These publications are subject to updates; it is the installer’s responsibility to review them and ensure compliance. Always supervise children and check for excessive surface heat before use.
