S130 Strap Swing Seat
Engineered for high durability and safety, the S130 strap swing seat features galvanized welded triangular hardware and a robust 1075 full-hard steel insert with rounded edges encased in thick EPDM rubber. The welded steel triangles and galvanized steel mounting plate provide added vandal-resistance, making this one of the strongest seats available for commercial use. This seat is designed for children ages 4 to 12 and is ideal for public playgrounds, schools, and parks.
Product Specifications
-
Dimensions: 24” x 6” x 5/16”
-
Overall Length (Hanger to Hanger): 30 ¼”
-
Material: EPDM rubber with painted steel insert
-
Insert: Full-hard 1075 steel with rounded edges
-
Triangle Hardware: 3/8" cold-rolled steel, welded closed
-
Mounting Plate: 1/16” galvanized steel
-
Rivets: Six total (¼” diameter), three per side
-
Tensile Strength: 5,650 lbs.
-
Lifespan: 2–5 years depending on environmental conditions
Installation Notes
-
Recommended Chain Length:
-
Minimum Clearance from Surfacing: 12″
-
Connection: Use H170 shackle or 3/8” S-hooks
-
Warning label should face upward and be legible
-
Ensure the swing hangs evenly and fasteners are fully closed per Figure A1.19
-
Limit two swings per bay to avoid collision risk
-
Use zone: Extend twice the vertical pivot-to-seat height in front and behind; 6′ to the sides
Maintenance Checklist
Inspect monthly and at the start/end of each play season:
-
Check for:
-
Cracks in rubber
-
Exposed or damaged insert
-
Worn or rusty chains
-
Loose or vandalized hardware
-
Properly closed shackles/S-hooks
-
Ensure surfacing meets ASTM F1292 depth and safety requirements
-
Replace all swings purchased at the same time if one is worn
-
Remove swings when temperatures fall below 0°F or exceed 100°F
-
Maintain detailed inspection records
This swing seat is not for adult use. All swings must be supervised and regularly maintained. Any damage from misuse, abuse, or vandalism voids the warranty.
